Water and gas pipes with small diameters

Welded steel tubes range:

— ∅ 12,7 - 108 mm (0,5 - 10,6")
— Wall thickness: 0.8 to 6.3 mm

  • Pipes are produced by high-frequency welding with induction current lead
  • At the consumer’s request pipes are packed in hexagonal and box bundles
  • Pipes are subjected to hydraulic and mechanical tests
  • Pipes fully comply with requirements of international standards
  • Welds undergo non-destructive testing
  • Pipe bundles are provided with removable shipping straps for fixing in trans-shipment points and storage without additional pulling appliances

Pipes standard and steel grade

DIN EN 10255

Steel grade S185, S195T, S235JRH, P195TR1, P235TR1 (and other)
Outside dia., mm: 13.5 - 114.3
Wall thickness, mm: 2.0 - 5.4

DIN EN 10217-1

Steel grade S185, S195T, S235JRH, P195TR1, P235TR1 (and other)
Outside dia., mm: 12.7 - 108.0
Wall thickness, mm: 0.8 - 6.3

DIN EN 10219-1

Steel grade S185, S195T, S235JRH, P195TR1, P235TR1 (and other)
Outside dia., mm: 21.3 - 114.3
Wall thickness, mm: 2.0 - 6.3

DIN ЕN 10220, DIN 1615

Steel grade S185, S195T, S235JRH, P195TR1, P235TR1 (and other)
Outside dia., mm: 21.3 - 108.0
Wall thickness, mm: 2.0 - 4.0